Hi, I am Vlad, a founder of 3DPassion.com. Welcome to my Nova project!

I want to introduce you to the result of an entire year of development – Nova 

And What is Nova?

 PLAY

•  slomo during first tests, sound on. Fanless heatsink cools from fast motion! 300mm/s! 

Nova is a high performance 3D Printer hotend that is compatible with the most 3D printers you already own! 

Here are some of the key features on this new hotend:

- Print at high flow at 300+ mm/s speeds thanks to a thermal design that works!

• Nope, no catch here. It's not limited to 0.1 layers, this speed was tested with 0.25 layer height and 0.5 nozzle. 

• And no, you don't need special extruder either. All tests were intentionally conducted on popular hardware that most of you already use.

- Nova is literally clog-proof. If you manage to clog it, please share your secret!

 PLAY

•  280mm/s demo. 0.5 nozzle. 0.2 layer height. Fanless! 

- Up to 80% less active cooling is required. Allows to reduce fan speed and eliminate all the noise.

- Fully modular design.  Every component is customizable according to your budget and your  specific needs. Printing PLA? Choose a stock version. Suddenly feel like going watercooled? Got you covered! Keep the existing hotend and get a  quick add-on without breaking the bank.

- EasyLevel. Hotend height is easily adjustable for multi-extruder setups.

- QuickSwap. Quickly change print cores in under 1 minute without having to replace the entire hotend.

- No cheap parts, no settling for less, no BS. Every component is produced with only performance and  quality in mind, not our bottom line.

- Smaller thinner titanium heatbreaks do the job 2x better.

- Smaller thinner nozzles because why not!

- Improved 60-80-100 Watt heaters, 500C rated. Let's heat things up!

• Reach 210C in under 20 seconds! 

• Reach 500C in under 50 seconds!

- Shorter sturdier hotend to make sure there is no play at the tip

- PEEK enabled - print at up to 500C, easy!

Ready to jump in? 

Before you do, check out these sweet add-ons to add more fun to your Nova Hotend experience!

*in order to add any of these add-ons, simply add the price amount to your pledge total.

**base Nova pledge is required.

Post-campaign upgrades (scheduled for May 2019):

- Improved optional copper heatsink with ThermalGrip

•  ThermalGrip - ensures maximum contact area for maximum thermal transfer.

•  Comes with 40mm silent fan

- Optional H2O Cooling block with ThermalGrip

•  Comes with connectors and tubes, pump is not included.

- Tungsten Carbide Nozzles

• Best of all worlds!

• Will come in 0.25, 0.5 and 1.0 sizes.

And before you scroll back up...

Here is another speed printing demo; original sound was intentionally left intact to show that video speed has not been modified. 

 PLAY

•  Print settings: 260mm/s, 0.2mm layer height, 0.5mm nozzle, no heatsink fan!